Finishing; Cast Front Installation And Removal; Safety Barrier Installation And Removal - Napoleon Bayfield GDS25N-1 Installation And Operation Manual

26

4.0 finishing

EN
5.0 FINISHING
WARNING
!
• Risk of fi re!
• Never obstruct the front opening of the appliance.
• Do not strike, slam, or scratch. Do not operate appliance with glass removed, cracked, or scratched.
DO NOT STRIKE, SLAM OR SCRATCH GLASS. DO NOT OPERATE APPLIANCE WITH GLASS
4.1

cast front installation and removal

WARNING
5.1 CAST FRONT INSTALLATION AND REMOVAL
!
• Glass may be hot.
• Do not touch glass until cooled.
Remove safety barrier.
A.
A. Remove safety barrier.
Lift the top cast piece off of
B.
B. Lift the top cast piece off of
the appliance.
the appliance.
Detach the front cast piece
C.
C. Detach the front cast piece
from the side pieces by
from the side pieces by
removing the screws from the
removing the screws from
brackets located in the upper
the brackets located in the
inside corners.
upper inside corners.
Slide the front straight up to
D.
D. Slide the front straight up to
remove.
remove.
Follow the above steps in reverse in
order to reinstall the cast front. Ensure
Follow the above steps in reverse
that the tabs on the underside of the
in order to reinstall the cast front.
front fit behind the front legs.
Ensure that the tabs on the
note:
underside of the front  t behind the
front legs. It is not necessary to remove the cast front in
order to remove the door.
NOTE: It is not necessary to
remove the cast front, in order to
remove the door.
4.2

safety barrier installation and removal

5.2 SAFETY BARRIER INSTALLATION AND REMOVAL
A barrier designed to reduce the risk of burns from the hot viewing glass is provided with the appliance
A barrier designed to reduce the risk of burns from the hot viewing glass, is provided with the
and shall be installed.
appliance and shall be installed.
A. Lift the top casting up and remove the safety barrier. Remove and discard plastic.
Lift the top casting up and remove the safety barrier. Remove and discard plastic.
A.
B. Tilt the top of the safety barrier and hook under the top casting, make sure to hold the safety barrier. Tilt the top of the safety barrier and hook under the top casting, make sure to hold the safety barrier.
B.
C. Slightly lift the bottom of the safety barrier and push onto the unit. Careful not to scratch the bottom Slightly lift the bottom of the safety barrier and push onto theappliance. Careful not to scratch the bottom
C.
casting. casting.
Reverse these steps to remove.
D. Reverse these steps to remove.
D.
26
W415-2207 / B / 02.05.18
W415-1332 / A / 11.21.14
NEVER OBSTRUCT THE FRONT OPENING OF THE APPLIANCE.
REMOVED, CRACKED, BROKEN OR SCRATCHED.
GLASS MAY BE HOT, DO NOT TOUCH GLASS UNTIL COOLED.
3
FRONT
WARNING
!
RISK OF FIRE!
WARNING
!
Screws
Front
2
SCREWS
BRACKET
FRONT
TAB
DOOR
RETAINER
72.4
45.3
Bracket
Front
Tab
Door
Retainer
Front Legs
FRONT
LEGS