5.1
cast front installation and removal
WARNING
!
•
Screens must be closed while the appliance is in operation.
A.
Lift the top cast piece off of the heater.
B.
Detach the front cast piece from the side pieces by removing the
screws from the brackets located in the upper inside corners.
C.
Slide the front straight up to remove.
Follow the above steps in reverse in order to reinstall
the cast front. Ensure that the tabs on the underside of
the front fi t behind the front legs.
5.2
screen installation and removal
A.
Unscrew the four screws (one in each corner) securing the
screen to the heater face.
B.
Remove screen from heater.
Follow the above steps in reverse in order to reinstall the screen.
5.3
logo placement
Remove the backing of the logo supplied and centre over the logo installa-
tion holes, as indicated.
5.0 fi nishing
3
SCREWS
FRONT
FRONT
TAB
DOOR
RETAINER
FRONT
LEGS
LOGO
W415-1968 / 06.26.19
EN
2
BRACKET
13