Commissioning
7.1
Switching on the unit
● Switch the device on using the power switch.
The EIZO logo is displayed for a short time.
● If no signal is present, a black image is output on the monitor.
● If a signal is present, the black image disappears.
7.2
Operator controls
①
,
Figure 7-1
The four keys are located at the rear in the bottom right-hand corner of the monitor.
RadiForce® LX470W
Instruction Manual, 06/2012, 1015263-003
②
③
④
,
,
: OSD operation (4 keys)
Rear view of RadiForce® LX470W: OSD operation
7
31