To Remove The Bobbin Case From The Machine - Kenmore 385.128418 Owner's Manual

:: Prepare the Bobbin:
= To Remove the Bobbin Case from the Machine
= Wind the Bobbin
Release clutch by turning clutch
knob toward you.
Remove the extension table from
the machine by pulling it to the
left, Open the shuttle cover by
pulling down the embossed part on
the left side of the cover.
Raise needle to its highest position
by rotating hand wheel toward you.
To remove bobbin case from shut-
tie, pull open latch of bobbin case.
Pull bobbin case straight out of
shuttle.
1!