Kenmore 385.128418 Owner's Manual page 16

Thread Your Needle
@
The numbered steps below follow the numbers on the illustrations.
Dotted lines show places where the thread loops end then is pulled
tight.
J
1, Draw thread through thread
guide.
Raise thread take-up ]ever to its highest position by turning
hand wheel toward you. Raise presser foot lever, Place spool
on spool pin as shown, with thread coming from the back of
the spool
2, While holding thread near
spoo]0 draw thread into
threading channel toward
you making sure the thread
is pulled firmly between the
tenston discs,
3. Draw thread down channel
and around the spring wire
as shown,
__ J
4. Draw thread up & through
take-up lever,
14