Dimplex LA 33TBS Installation And Operating Instructions Manual page 29

LA 33TBS
6 Complies with the European safety regulations
7 Additional model features
7.1 Type of defrosting
7.2 Frost protection, condensate tray /
Water in device protected against freezing
7.3 Max. operating overpressure (heat sink)
8 Heat output / COP
8.1 Heat output / COP
1. For air temperatures between -22 °C and 0 °C, flow temperature increasing from 45 °C to 65 °C.
2. The heat output and COP is reduced by approx. 5 % in lower operation.
3. The maximum sound power level under full load can increase by up to 5 dB(A).
4. When the optional weather protection hood (accessory) is used, the sound power level is reduced by 2 dB(A) and the sound pressure level in outlet direction by 3 dB(A).
5. The specified sound pressure level represents the free sound area level. The measured value can deviate by up to 16 dB(A), depending on the installation location.
6. These specifications indicate the size and capacity of the system according to EN 14511 (5K at A7). For an analysis of the economic and energy efficiency of the system, other
parameters, in particular the defrosting capacity, the bivalence point and regulation, should also be taken into consideration. These figures are only achieved with clean heat
exchangers. Information on maintenance, commissioning and operation can be found in the respective sections of the installation and operating instructions.
The specified values, e.g. A7 / W35, have the following meaning: External temperature 7 °C and heating water flow temperature 35 °C.
7. see CE declaration of conformity
8. The heat circulating pump and the heat pump manager must always be ready for operation.
www.dimplex.de
8
Performance level
with A-7 / W 35 kW / ---
with A2 / W 35 kW / ---
with A7 / W 35 kW / ---
with A7 / W 45 kW / ---
with A7 / W 55 kW / ---
with A7 / W 65 kW / ---
with A10 / W 35 kW / ---
452166.66.05 · FD 9803
bar
11.4 / 3.4
12.6 / 3.9
16.1 / 4.8
15.9 / 3.9
15.1 / 3.3
14.4 / 2.8
17.4 / 5.1
English
7
Reverse circulation
Yes
3.0
EN 14511
1 2
20.0 / 3.2
20.6 / 3.6
-
-
-
-
-
EN-13