Page 1
Glen Dimplex Deutschland Dimplex LA 3860 Installation and Operating Instruction Air-to-Water Heat Pump for Outdoor Installation Order no.: 452167.66.48-EN EN · FD 0212...
LA 3860 English Table of contents Safety notes..............................EN-2 1.1 Symbols and markings ..............................EN-2 1.2 Intended use..................................EN-2 1.3 Legal regulations and directives ..........................EN-2 1.4 Energy-efficient use of the heat pump........................EN-2 Purpose of the heat pump ........................EN-3 2.1 Application ..................................EN-3 2.2 Operating principle................................EN-3 Scope of supply ............................EN-4...
English LA 3860 1.4 Energy-efficient use of the heat Safety notes pump 1.1 Symbols and markings By operating this heat pump, you are helping to protect the en- vironment. A prerequisite for energy-efficient operation is the Particularly important information in these instructions is correct design of the heat source system and heating system.
LA 3860 English 2.2 Operating principle Purpose of the heat pump Surrounding air is drawn in by the fan and fed through the evap- 2.1 Application orator (heat exchanger). The evaporator cools the air, i.e. it ex- tracts heat from it. This extracted heat is then transferred to the The air-to-water heat pump is to be used exclusively for the working medium (refrigerant) in the evaporator.
English LA 3860 Scope of supply 3.1 Basic device The heat pump contains the components listed below. The refrigeration circuit is "hermetically sealed" and contains the fluorinated refrigerant R407C included in the Kyoto proto- col. Information on the GWP value and CO equivalent of the refrigerant can be found in the chapter Device information.
LA 3860 English Transport Installation CAUTION! 5.1 General When transporting the heat pump, ensure that it is not tilted more than 45° (in any direction). The device must be installed on a permanently level, smooth and horizontal surface. The frame around the device must lie...
English LA 3860 CAUTION! Assembly For installation close to walls the physical influences of the building must be considered. No windows or doors should be 6.1 General present in the area surrounding the air outlet of the ventilator. The following connections need to be established on the heat...
Page 9
LA 3860 English Note: Scale formation in domestic hot water heating systems cannot be avoided, but in systems with flow temperatures below 60 °C, The hot water connections must be established according to the problem can be disregarded. With high-temperature heat the dimensional drawing (see Cap.
English LA 3860 6.3 Electrical connection Start-up 3 lines/cables must be routed to the heat pump in total: 7.1 General A standard 5-core cable is used to connect the heat pump to the power supply. To ensure that start-up is performed correctly, it should only be The cable must be provided on-site.
LA 3860 English 7.3 Procedure 8.2 Cleaning the heating system The heat pump is started up via the heat pump manager. Ad- CAUTION! justments should be made in compliance with the instructions. The installed dirt traps must be cleaned at regular intervals.
English LA 3860 8.3 Cleaning the air system Faults / troubleshooting The evaporator, ventilator and condensate outflow should be This heat pump is a quality product and is designed for trouble- cleaned of contamination (leaves, twigs, etc.) before each new free operation.
LA 3860 English 11 Device information Type and order code LA 3860 Design Heat source Version Universal Controller WPM wall-mounted Thermal energy metering Integrated Installation location Outside Performance level Operating limits Heating water flow / return °C to 60 -2(to 62 -2)
Page 14
English LA 3860 Additional model features Type of defrosting (according to need) Reverse circulation Condensate tray frost protection / Water in device Heated / Yes protected against freezing max. operating overpressure (heat source / heat sink) 10 Performance / coefficient of performance (COP) 10.1 SCOP (Seasonal coefficient of performance) average climate 35 °C / 55 °C...
Contact details Glen Dimplex Deutschland GmbH, Am Goldenen Feld 18, 95326 Kulmbach (*) For heat pump space heaters and heat pump combination heaters, the rated output Prated is equal to the design load for heating Pdesignh , and the rated heat output of a supplementary capacity for heating sup(Tj ).
LA 3860 English 14 Diagrams 14.1 Characteristic curves for heating operation Heizleistung in [kW] Wasseraustrittstemperatur in [°C] Heating capacity in [kW] Water outlet temperature in [°C] Puissance de chauffage en [kW] Température de sortie de l'eau en [°C] EN 14511 A7 W35...30...
LA 3860 English 16 Declaration of Conformity You can find and download the current CE conformity declaration at: https://dimplex.de/la3860 www.dimplex.de 452167.66.48-EN · FD 0212<Betonung> EN-19...
Page 22
English LA 3860 EN-20 452167.66.48-EN · FD 0212<Betonung> www.dimplex.de...
Page 23
LA 3860 English www.dimplex.de 452167.66.48-EN · FD 0212<Betonung> EN-21...
Page 24
Glen Dimplex Deutschland On site service Head office After-sales service, technical support and Glen Dimplex Deutschland GmbH spare partsl. Assistance before and Am Goldenen Feld 18 after installation of your equipment D-95326 Kulmbach T +49 9221 709-545 T +49 9221 709-101...