Safety Precautions - Panasonic KY-R647EL Operating And Installation Instructions

Table of Contents

Advertisement

Available languages

Available languages

Safety Precautions

In order to prevent accidents or injuries to the users, other people, and damage to
property, please follow the instructions below�
The following charts indicate the degree of damage caused by wrong operation�
WARNING
CAUTION
The symbols are classified and explained as follows�
Stop using the unit when
abnormality / failure occurs and
turn 'OFF' the power switch or
pull out the 3 pin plug�
Example of abnormality / failure:
Abnormal noise or heat.
Abnormal emission of smoke, fire.
Fire or oil ignition.
The unit must be grounded�
Plug the power cord to socket
outlet with grounding continuity
terminal�
Improper grounding could cause
electric shock.
The means for disconnection
must be incorporated in the fixed
wiring in accordance with the
wiring rules�
This appliance is necessary to
allow disconnection from the
supply after installation� The
disconnection may be achieved
by having the plug accessible or
by incorporating a switch in the
fixed wiring in accordance with
the wiring rules�
EN-2
Indicate serious injury or death�
Indicate risk of injury or property damage�
These symbols
indicate prohibition�
WARNING
Make sure to follow these instructions
This symbol indicates requirement
that must be followed�
This appliance is not intended
to be operated by means of an
external timer or a separate
remote-control system�
If the supply cord is damaged,
it must be replaced by the
manufacturer, its service agent
or similarly qualified persons in
order to avoid a hazard�
Be sure to disconnect the Power
Plug from the wall outlet or switch
OFF the external switch before
maintenance, repair or service�
Also, do not handle the Power Plug
or external switch with wet hand�
When disconnecting the Power
Plug, hold the plug itself� Do not
pull the cord in anyway� The cord
may be damaged and may cause
fire or electric shock�
Insert the Power Plug firmly,
otherwise it may cause fire or
electric shock�
Clean the Power Plug regularly,
otherwise, it may cause
insufficient insulation due to
moisture, and may cause fire�

Advertisement

Table of Contents
loading

Table of Contents