Failure Display And Inspection - Panasonic KY-R647EL Operating And Installation Instructions

Failure Display and Inspection

If an abnormality comes up, the Induction Hob will display error codes as below:
Display Error
Code
/ /
/
/ /
/
/
/
/
■
Note:
•
The above are the judgment and inspection of common failures.
Do not disassemble the unit by yourself to avoid any dangers and damages to
the Induction Hob�
EN-20
Possible Causes
Temperature sensor of the
/ /
ceramic plate failure.
Temperature sensor of the
/ /
IGBT failure.
Abnormal supply voltage.
High Temperature of
ceramic plate.
Bad Induction Hob heat
radiation.
WARNING
Solution
Contact a qualified technician
or service center for
assistance.
Contact a qualified technician
or service center for
assistance.
Inspect whether power supply
is normal. Switch the power on
if the power supply is normal.
Wait for temperature to return
to normal. Touch the
restart the unit.
1. Wait for temperature to
return to normal. Touch the
to restart the unit.
2. Contact a qualified
technician or service center
for assistance.
to