Panasonic KY-R647EL Operating And Installation Instructions page 13

For method
In standby mode,
1. Touch or
2. While the power level is still flashing, touch
to set the time. (0-99 minutes)
3. A red dot flashing next to the power level will be visible on the display,
for example,
4. It will begin to countdown immediately. The display will show the remaining time.
■
Note:
•
A beep will sound once when the timer reaches
display.
•
The selected cooking zone will turn off automatically. Other cooking zones will keep
operating if they had been turned on previously.
•
During the countdown, you can change the power level by touching
corresponding cooking zone.
For method
When you have set the cooking time for several cooking zones, the display will show
the remaining time of the cooking zone that has the shortest countdown. A dot of the
corresponding cooking zone will light next to the power level.
In standby mode,
1. Touch or
2. While the power level of the selected cooking zone is still flashing, touch
of the "Program Time Control" to set the time. (0-99 minutes)
3. A red dot flashing next to the power level of the selected cooking zone will be visible
on the display.
4. Repeat steps 1-3 above for other cooking zones you require.
■
Note:
•
A beep will sound once when the timer of the cooking zone with the shortest cooking
time reaches
zone.
•
The corresponding cooking zone will turn off automatically.
•
Then the display will show a new countdown for the cooking zone that has the shortest
cooking time. The red dot of the corresponding zone flashes.
•
During the countdown, you can change the power level by touching
corresponding cooking zone.
2
of the cooking zone you require.
. The dot indicates which cooking zone has been selected.
3
of the cooking zone you require.
. will be visible on the display for the corresponding cooking
or of the "Program Time Control"
. will be visible on the
or of the
or
or of the
EN-11