Timer Function - Panasonic KY-R647EL Operating And Installation Instructions

Using the Induction Hob
You can use the timer for any of the 3 methods below:
To set as Reminder. In this case, the timer will not turn any cooking zone off when the
set time is up.
To set time to turn only one cooking zone off when the set time is up.
To set time to turn two or more cooking zones off when the individual set time is up.
■
Note:
•
You can cancel the timer by touching
simultaneously.
•
Touch or
1 minute.
•
Hold or
10 minutes.
For method
In standby mode,
1. Touch
2. Wait for the power level to stop flashing.
3. Touch
4. It will begin to countdown immediately. The display will show the remaining time.
Alternatively, you can operate the timer in following steps:
•
Touch or
zone you require without waiting for any indicator to stop flashing.
■
Note:
•
A beep will sound when the timer reaches
Touch any control on the display to stop the beep.
•
The heating will continue until you cancel the operation, or the appliance will shutdown
automatically based on default heating time. (Refer to "Auto Shutdown Protection")
•
During the countdown, you can change the power level by touching
corresponding cooking zone.
EN-10

Timer Function

will be visible on the display.
control of the "Program Time Control" to decrease or increase timer by
control of the "Program Time Control" to decrease or increase timer by
1
or of the cooking zone you require.
or of the "Program Time Control" to set the time. (0-99 minutes)
of the "Program Time Control" first, then touch
to , or touching
. will be visible on the display.
and
or of the cooking
or on the