Siemens SITRANS Probe LU Operating Instructions Manual page 53

P342 Power-On Resets
The number of times power has been applied since the date of manufacture.
Values (view only)
Related
This parameter is updated every time the instrument is reset or is powered up.
P343 Internal Temperature
WARNING: Internal temperature must not exceed 80
Displays (in degrees C) either the current temperature on the circuit board, or the
maximum or minimum temperature recorded by the internal sensor. The high and low
values are maintained over a power cycle.
Primary Index
Value (view only)
Secondary Index
1. Select P343.
2. The primary reading displays a temperature, and the secondary index number is
visible in the auxiliary reading field.
3. Press DISPLAY
4. Key in the index number required, and press ENTER
5. The temperature value associated with the new secondary index appears.
6. Press DISPLAY
desired parameter.
A5E32337695 SITRANS Probe LU (HART) – OPERATING INSTRUCTIONS
Display
Default:
P341 RUN Time
P343
o
Range
–50
Current temperature
1 *
Maximum temperature
2
Minimum temperature
3
twice to focus control on the secondary index.
twice and use the ARROW keys or enter the value for the next
0.0 to 99999
0
o
C (176
o
C to 150 C
.
o
F).
Page 47