Before You Do Your First Wash - Fisher & Paykel WASHSMART WA60T56G Installation Manual/User Manual

You owe it to yourself and your washer to have your washer installed correctly.
Before you start, it is a good idea to go through the following checklist:
Has the base packer been removed? (refer to 'Installation Instructions' section).
1
Is the drain hose threaded through the 'U bend' (with no more than 20mm extended)
2
and hooked into your tub or standpipe? (refer to 'Installation Instructions' section).
Is the hot hose connected to the Hot valve marked 'H'? Is the cold hose connected to
3
the Cold valve marked 'C'? (refer to 'Installation Instructions' section).
Is the washer correctly levelled, feet are extended and cabinet corners are clear of the
4
floor? (refer to 'Installation Instructions' section).
If you bought a QuickSmart™ model, it is a good idea to check the warm fill temperature
(refer to 'Changing pre-set options — Wash temperatures').
WashSmart™ washer and QuickSmart™ washer capacities
The table below outlines what is included in a 5.5kg and 6.0kg wash load (in accordance
with AS/NZS 2040.1:2005).
WASH LOAD
Sheets (double)
Bath towels
Tablecloths
Shirts
T-Shirts
Pillowcases
Shorts
Washcloths
Handkerchiefs
Note: the above load composition is indicative only. We recommend for everyday use
that you separate out your sheets and towels and wash them separately on the 'Regular'
cycle.
Note: the WA8056M and WA8056G models have a different capacity based on country
standards. Refer to the serial plate on the back of the product.

BEFORE YOU DO YOUR FIRST WASH

5.5kg
2
4
2
2
3
4
3
5
4
6.0kg
2
5
2
3
3
4
3
4
5
11