Fisher & Paykel WASHSMART WA60T56G Installation Manual/User Manual page 34

Wash temperatures
On the QuickSmart™ model the 'Warm' temperature can be adjusted if you think it is too
● ●
hot or too cold.
On the WashSmart™ model all wash temperatures can be individually adjusted.
● ●
Note: the hot and cold temperatures will be the same as the respective water supply
temperatures.
When in option adjustment mode, select the 'Wash Temp' you want to adjust.
1
The wash progress lights show the temperature adjustment possible for that temperature.
2
Pressing the
● ●
Advancing the wash progress light will increase the wash temperature. If you keep
● ●
pressing the
that wash temperature.
Adjusting the temperature setting
Note: while WashSmart™ model is shown, the setting of the QuickSmart™ model is identical
Note: if you have a QuickSmart™ model and still can't get the temperature you require,
advance the progress light
and manually adjust the flow of the taps.
Rinse options
You can change the pre-set rinse options
on the 'Heavy Duty' and 'Regular' cycles
of the WashSmart™ model, and on the
'Heavy Duty', 'Regular' and 'Wool' cycles
of the QuickSmart™ model.
The default rinse option on these cycles
is a spray rinse followed by a deep rinse.
The first step of the default rinse can
be replaced with a short spin, or a deep
rinse, by selecting another option.
If you have a problem with impurities in your water supply you may get a better result if
you change the rinse option to two 'Deep' rinses. If you wish to conserve water, change
the rinse option to one 'Deep' rinse. If you want to conserve even more water, choose
the 'Eco' option.
32
CHANGING PRE-SET OPTIONS
button will cause the wash progress light that is on to change.
button, the light will scroll back to the coldest setting available for
(while in the options adjustment mode) across to 'Spin'
'Med' spin light on
'Slow' spin light on
'Hold' light on
(default)
RINSE OPTIONS
Rinse 1 Rinse 2
Deep Deep
rinse rinse
Short Deep
spin rinse
Spray Deep
rinse rinse