Table of Contents
Advertisement
Completing your installation
Turn on the water and check all hose connections for leaks. Make sure there are no kinks
●
●
in the hoses. Check the hose connections for leaks again after 24 hours.
Uncoil power cord, remove and discard the plastic pin cover, and plug into wall socket.
●
●
Connect the appliance to an earthed outlet protected by a fuse of suitable capacity.
●
●
IMPORTANT!
Do not touch or operate the washer with wet hands or with bare feet.
ACCESSORIES AND SPARE PARTS
Available from your Fisher & Paykel dealer or a Fisher & Paykel trained and supported
service technician.
Blanking Cap
Hose Inlet Long (2m)
Hose Inlet Large Bore
Drain Hose Extension
Power Cord
10
INSTALLATION INSTRUCTIONS
Part No. 388491P
Part No. 422680P
Part No. 426123P
Part No. 425627P
If the power cord of your clothes washer is damaged it is
highly recommended that it is replaced by a Fisher & Paykel
trained and supported service technician in order to avoid a
hazard, as it is not a standard power cord.
Hide quick links:
Advertisement
Table of Contents
