Before You Do Your First Wash - Fisher & Paykel AquaSmart 2 Installation Instructions And User Manual

Hide thumbs

Table Of Contents

Table of Contents

You owe it to yourself and your AquaSmart 2™ to have it installed correctly by a technician from a

Fisher & Paykel Authorised Repairer.

Before you start, it is a good idea to go through the following checklist:

Has the basepacker been removed?

Is the hot hose connected to the hot valve marked 'H'?

Is the cold hose connected to the cold valve marked 'C'?

Is the drain hose threaded through the 'U bend' hose guide

(with no more than 20 mm extended) and onto your standpipe?

Are the rubber inserts secured into the feet on the base of your

machine, the machine levelled, and corner cabinets clear of the

floor? Refer to 'Installation instructions' , page 5.

AquaSmart 2™ water consumption

Load Size

8 kg capacity

7 kg capacity

5 kg

3 kg

1 kg

*Consumption measured with Softener option off.

Regular, High Efficiency, with the Softener option off is the recommended water saving cycle for

normally soiled, everyday washing.

AquaSmart 2™ capacity

AquaSmart 2™ offers a generous 7 kg or 8 kg capacity. The list below outlines what is included in

a 7 kg or 8 kg wash load (in accordance with AS/NZS 2040.1:2005).

3 Sheets (double)

4 Bath towels

3 Tablecloths

5 Shirts

5 T-shirts

Note: the above load compositions are indicative only. We recommend for everyday use that you

separate out your sheets and wash them on the specially designed SHEETS cycle.