Table of Contents
Advertisement
To customise a cycle
WashSmart™ model only
You can program your washer to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the 'Regular' cycle to a 'Cold' wash or set
'Heavy Duty' to include a 'Soak'.
Press 'Power'
1
Press the wash cycle button. Hold down for 2 seconds.
2
You will hear 2 quick beeps and the wash cycle light will flash.
Select your wash options, eg 'Cold' wash, 'Soak'.
3
Press the wash cycle again to store your customised cycle.
4
To change your customised wash cycle simply repeat these steps.
When you are customising a wash cycle you can shorten or lengthen the wash time:
To shorten the wash time, press the
●
●
lights that are illuminated.
To increase the wash time keep pressing the
●
●
are illuminated (refer to 'Getting started quickly — WashSmart™ model').
Note: unlike the 'Favourite' cycle you cannot customise a wash cycle to start at the
'Rinse' or 'Spin' stage. On 'Heavy Duty' you can only decrease the wash time.
Customising a wash cycle
CUSTOMISING THE WASH CYCLES
.
button to reduce the number of wash progress
button until all the wash progress lights
29
Hide quick links:
Advertisement
Table of Contents
