Table of Contents
Advertisement
Option adjustment mode
After using your washer a number of times you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which can be altered.
In the WashSmart™ model the following pre-set options can be changed:
The wash temperatures.
●
●
The 'Rinse' option on 'Heavy Duty' and 'Regular' cycles.
●
●
The 'Cold' wash to 'Controlled Cold'.
●
●
The number of beeps at the end of the cycle.
●
●
The fill level selected by 'Auto' water level.
●
●
The out of balance recovery routine.
●
●
In the QuickSmart™ model the following pre-set options can be changed:
The 'Warm' wash temperature.
●
●
The 'Rinse' option on 'Heavy Duty', 'Regular' and 'Wool' cycles.
●
●
The out of balance recovery routine.
●
●
To enter option adjustment mode
Turn washer on at the wall but do not press
1
'Power'
. Press
press 'Power'
beeps and the washer will show an unusual
pattern of lights. In this mode the lights are
used to indicate the different options available.
The diagram on the next page shows how the
lights relate to the options you can change.
The following pages explain the different
options in more detail.
Use the buttons on the panel to make your
2
changes to the pre-set options.
Press 'Power'
3
Your washer will automatically remember
4
your changes.
30
CHANGING PRE-SET OPTIONS
and hold down, then
. You will hear two quick
to return to normal mode.
WashSmart™
Entering Option Adjustment mode
Note: while WashSmart™ model is
shown, setting of the QuickSmart™
model is identical
Hide quick links:
Advertisement
Table of Contents
