BEFORE YOU DO
YOUR FIRST WASH
BEFORE YOU DO YOUR FIRST WASH
Thank you for buying a Fisher & Paykel Smart Drive
washing machine. We are very proud of this washer
and trust it will serve you well for many years.
You owe it to yourself and your Smart Drive to have it
installed correctly by an authorised service agent.
Before you start, it is a good idea to go through
the following checklist:
1. Has the basepacker been removed?
2. Is the hot hose connected to the hot valve marked
'H'? Is the cold hose connected to the cold valve
marked 'C'?
3. Is the drain hose threaded through the 'U bend'
(with no more than 20mm extended) and on to
your standpipe?
4. Are the rubber inserts secured into the feet on the
base of your machine? and is the machine levelled?
Refer to Installation Instructions, Section 8.
If you have bought a PRIDE model it is a good idea
to check the warm fill temperature. (Refer to page
18).
3