Intermec ColorCoder V4 Service Manual page 87

3.2 Image Formation System, cont'd.
3.2:A BJ Head, cont'd.
Intermec ColorCoder V4 – Service Manual Ed. 1
Precautions in handling the BJ head
1. Never touch the surface of the BJ heads (ejection face) with your
fingers, a cloth, tissue, lint-free towel or with any materials.
2. Never breathe out on the BJ head, especially the face and keep
off from water, oil and solvent.
3. Never allow the BJ head to dry nor expose it to dust. Put it back
to the capping position as soon as possible, when it is removed
from the machine.
4. If the situation requires cleaning of the BJ head, always use the
new lint-free sponge (1-901800-00) and clear ink (1-901805-00).
Wipe off the face at a stroke slightly with the lint-free sponge
moistlned with a trace of the clear ink.
Chapter 3 Mechanical System
Head face
Figure 3-14
86