Unpacking And Installation; Unpacking - Intermec ColorCoder V4 Service Manual

4.2 Unpacking and Installation

4.2:A Unpacking
No. Procedure
1 Unpack the machine and remove the vinyl sheet.
2 Take out the accessories and check the packed parts.
Power cords (2)
Collux ink cartridges
(2 x 100 ml)
Intermec ColorCoder V4 – Service Manual Ed. 1
If a metal object is brought from a cold location into a warm one,
water droplets may form on its surface. This is called condensation
and a printer that has been subjected to condensation may not
produce an image. For this reason, when installing a machine that
has been moved cold place to warm place, it should be left as it is
packed for more than one hour to allow it to warm up to room
temperature before it is unpacked and installed.
Printer driver kit
Manuals
Head shading data
software package
Clear ink
Cleaning sheets
Cleaning sticks
Collux ink cartridges
(2 x 100 ml)
Chapter 4
Inspection/Remarks
Refer to the installation guide enclosed with the
machine.
Check that the following accessories and sub
materials are contained in the package:
• Collux ink cartridges (4 colours; yellow,
magenta, cyan and black)
• Power cord (2 pcs; 115V & 230V)
• Declaration of Conformity
• Users' Guide
• Installation & Operation manual
• Windows Printer driver software
• Head shading data floppy disk
• Bottle of clear ink
• Cleaning sheets
• Cleaning sticks
Installation
151