Intermec ColorCoder V4 Service Manual page 223

6.5 Service Mode, cont'd.
6.5:D List of Service Mode, cont'd.
V-NOZZLE ADJ.
T-K GAP ADJ.
K-C GAP ADJ.
C-M GAP ADJ.
M-Y GAP ADJ.
H-NOZZLE ADJ.
K NOZZLE ADJ.
C NOZZLE ADJ.
M NOZZLE ADJ.
Y NOZZLE ADJ.
STOP POS. ADJ.
CUTTER POS. ADJ.
DATE & TIME SET.
DATE SET.
TIME SET.
DISPLAY MODE
CLEANING MODE
Intermec ColorCoder V4 – Service Manual Ed. 1
Previous Set Values That Will Be Saved After NVRAM Reset
Vertical registration adjustment value
Vertical direction black printing position
Vertical direction cyan printing position
Vertical direction magenta printing position
Vertical direction yellow printing position
Horizontal registration adjustment value
Horizontal direction black printing position
Horizontal direction cyan printing position
Horizontal direction magenta printing position
Horizontal direction yellow printing position
Stop position adjustment value
Cutter position adjustment value
Set the date and time
year-month-day
hour:minute:second
Indicated languadge set
Cleaning mode set
Date and time setting (DATE & TIME SET.)
Control Panel Indication Description of Operation
DATE SET
TIME SET
Indicated language select (DISPLAY MODE)
Control Panel Indication Description of Operation
USA
JAPAN
Chapter 6
T-K GAP =-XX
K-C GAP =-XX
C-M GAP =-XX
M-Y GAP =-XX
K NOZZLE POS. =-X
C NOZZLE POS. =-X
M NOZZLE POS. =-X
Y NOZZLE POS. =-X
STOP POS. =0.0
CUTTER POS. =0.0
y-m-d 00-00-00
h:m:s 00:00:00
USA / JPN
MODE A / MODE B
Date (year-month-day) set.
Time (hour-minute-second) set.
Set to indicate English.
Set to indicate Japanese.
Troubleshooting
222