Convotherm OES 6.10 Installation Manual page 84

Optional equipment and accessories
Connecting the grill version to fat collecting container when container placed beneath the combi
steamer
To connect the fat collecting container under the appliance, follow the steps below:
Step Action
1 Place the fat collecting container (e.g. metal pail approx .10 - 15 liters) in a stable position under the
appliance.
2 Screw the tube connector onto the threaded outlet of the fat drain under the appliance base.
3
Feed the tube down into the fat collecting container, avoiding any kinks.
Connecting the grill version to fat collecting container when container placed beside the combi
steamer
To connect the fat collecting container beside the appliance, follow the steps below:
Step Action
1 Place the fat collecting container (e.g. metal pail approx .10 - 15 liters) in a stable position beside the
appliance.
2 Screw the pipe bend onto the threaded outlet of the fat drain under the appliance base.
3 Screw the tube connector onto the pipe bend.
4 Feed the tube down into the fat collecting container, avoiding any kinks.
First-time use
Inform the customer of the following points relating to operation and safety:
Step Action
1 The fat collecting container must contain water (above the level of the tube mouth). Otherwise the
closed system inside the oven is unable to work.
2 The fat collecting tray must be removed from the appliance, and the screw plug inserted in the fat
drain outlet, before:
every automatic cleaning cycle.
every automatic steam generator rinse cycle.
any cleaning operation using the hand shower.
Operation
Please refer to the user manual for information on operation.
Installation manual 83