Convotherm OES 6.10 Installation Manual page 42

Moving and setting up the appliance
Mounting table-top appliance on an oven stand
Oven stands on which combi steamers are mounted must not be used for other purposes (e.g. storing
materials).
Caution:
Risk of damage to supply lines if the appliance is mounted on an oven stand with wheels:
Lock the wheels of the oven stand before connecting the appliance to the supply lines.
If the appliance needs to be moved to a different installation position, all supply lines must be dis-
connected and the water drain removed before releasing the wheel locks.
When mounting the table-top appliance on an oven stand, follow the steps below:
Position the appliance on the oven stand
Ensure the oven stand is horizontal by adjusting the height of the feet.
Use a spirit level for this task.
Hold the appliance feet in position using the locating pins on the oven stand.
Make sure that the oven stand is in a stable position so that it cannot tip over or slide about.
The following diagram shows how to use the spirit level and adjust the feet to ensure the oven stand is
horizontal:
Installation manual 41