Page 1
ENGINE TIMING TOOL KIT CT4869 BMW (N63/N74/S63) Introduction: Special designed to located and turn the camshaft in correct TDC position. The timing tool is designed to hold the camshaft pulley for turning the central bolt. Item Description Crankshaft Alignment Tool...
Page 2
Model Chassis Engine Year Series 550i Gran Turismo N63/S63/N74 2010, 2011 550i xDrive Gran Turismo N63/S63/N74 2011 550i Sedan, N63/S63/N74 2011 550i Sedan A, 550i xDrive Sedan, 550i xDrive Sedan A 650i Convertible A, N63/S63/N74 2012 650i Convertible, 650i *Drive Convertible A 650i Coupe, N63/S63/N74 2012...
Page 3
Pre-load timing chain with pre-tensioning tool to Timing correct when camshaft alignment tools 0.6 Nm. abut cylinder head. Fig.2 Remove timing chain pre-tensioning tool. Install timing chain tensioner. Remove pin to release timing chain tensioner plunger. Adjusting Valve Timing Note: Carry out valve timing checking procedure first.
Page 4
Fig.7 Remove special tools. Turn crankshaft two turns clockwise. Install crankshaft alignment tool. Install crankshaft timing pin. Install camshaft alignment tools. Ensure camshaft alignment tools abut cylinder head. 17. Remove special tools. Crankshaft Holder for BMW After removal of the oil pump, proceed with removal of the timing cover.