Table of Contents
Related Manuals for Neilsen CT4789
Summary of Contents for Neilsen CT4789
- Page 1 20V CORDLESS IMPACT WRENCH CT4789 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. 20V CORDLESS IMPACT WRENCH Product description: CT4789 Model: Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU... - Page 5 CT4789-2 CT4789-1...
- Page 6 ADDITIONAL SAFETY RULES FOR ThE BATTERY PACK ADDITIONAL SAFETY RULES ChARGERS BATTERY ChARGING INFORMATION DANGER! WARNING! FAST ChARGE BATTERIES SLOW ChARGE BATTERY TRICKLE ChARGE BATTERIES...
-
Page 7: Battery Disposal
IMPORTANT! BATTERY ChARGING INDOORS NICAD AND/OR LI-ION BATTERY ChARGING INFORMATION. ALWAYS FULLY DISChARGE A NiCad and/or Li- Ion BATTERY BEFORE ChARGING AND NEVER EXCEED ThE ChARGING RATE TIME, EXCEPT WhEN “CONDITIONING” A NEW BATTERY. ChARGING PROCEDURE BATTERY DISPOSAL SPECIFIC SAFETY INSTRUCTIONS RE-ChARGEABLE BATTERIES. -
Page 8: Work Area
GENERAL SAFETY RULES WARNING! SAVE ThESE INSTRUCTIONS 1) WORK AREA 2) ELECTRICAL SAFETY 4) POWER TOOL USE AND CARE 3) PERSONAL SAFETY... -
Page 9: Charging The Battery Pack
5) BATTERY TOOL USE AND CARE ChARGING ThE BATTERY PACK 6) SERVICE COMPONENTS & CONTROLS (FIG 1) UNPACKING Caution! INSTALLING ThE BATTERY PACK Warning! - Page 10 REMOVING ThE BATTERY PACK ChARGE STATUS INSTALLING AND REMOVING SOCKETS Charge level indicator Amount of charge remaining INSTALLING ThE BELT CLIP VARIABLE SPEED CONTROL (FIG. 5) OPERATING ThE IMPACT WRENCh FORWARD & REVERSE SWITCh...
-
Page 11: Maintenance
IMPACT TIME TECHNICAL SPECIFICATION Many variables exist that will cause the available Voltage torque of the fastener to vary considerably. The optimum impact time is approximately 6 seconds. No load speed 0-2200min NOTE: Using a universal joint or extension bar may Impact rate 0-2900Bpm reduce the fastening force of the impact wrench and... - Page 12 SYMBOLS The rating plate on your tool may show symbols. These represent important information about the product or instructions on its use. Wear hearing protection. Wear eye protection. Contains Lithium Ion Wear respiratory protection. Li-ion 130° Conforms to relevant safety Thermal link with operating standards.