Table of Contents
Advertisement
Quick Links
1/4" DRIVE AIR RATCHET WRENCH CT
" DRIVE AIR RATCHET WRENCH CT1082
Cannon Tools Limited
Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE.
ORIGINAL INSTRUCTIONS
INSTRUCTIONS AND PRECAUTIONS.
Advertisement
Table of Contents
Related Manuals for Neilsen CT1082
Summary of Contents for Neilsen CT1082
- Page 1 1/4" DRIVE AIR RATCHET WRENCH CT " DRIVE AIR RATCHET WRENCH CT1082 ORIGINAL INSTRUCTIONS Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. SAVE THESE INSTRUCTIONS AND PRECAUTIONS.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 1/4" DRIVE AIR RATCHET WRENCH Model: CT1082 Applicable EC Directives: EC Machinery Directive 2006/42/EC Harmonized standards EN ISO 11148-6 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K. -
Page 3: Description (Fig A)
Fig. A: Product components: AIR RATCHET WRENCH 1. APPLICATION The air ratchet wrench is a pneumatic portable tool, used for running small bolts in tight space. The air ratchet wrench is a pneumatic portable tool, used for running small bolts in tight space. Designed for body shop works, radiator, spark plug , air condition &... -
Page 4: Safety Warnings
3. SAFETY WARNINGS SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury, loss of life or damage to the tool in case of non-observance of the instructions in this manual. Wear hearing protection. Wear safety goggles. -
Page 5: Getting Started
DO NOT direct air from the air hose at yourself or others. When not in use disconnect from air supply and store in a safe, dry, childproof location. 4. GETTING STARTED 4.1 Set-up Fitting the air inlet with the Europe style coupler Put plumbers tape around the thread of the Europe style coupler. - Page 6 If no filter/ pressure regulator/ lubricator is installed in the compressed air system, then pneumatic tools must be lubricated with 2 to 6 drops of tool oil at least once a day or after every two hours of use. This must be done directly along the male coupler or oil inlet provided for the purpose on the side of the tool’s housing.
-
Page 7: Maintenance
When not in use, disconnect from air supply, clean air ratchet wrench and store in a safe, dry, childproof location. 7. TECHNICAL DATA Model CT1082 1/4”Drive 150 /min No load speed Max. torque 25 ft/lb Air pressure 0.65Mpa... -
Page 8: Troubleshooting
8. TROUBLESHOOTING The following form lists the common operating system with problem and solutions. Please read the form carefully and follow it. WARNING: If any of the following symptoms appears during your operating, stop using the tool immediately, or serious personal injury could result. -
Page 9: Assembly Diagram And Parts List
9. ASSEMBLY DIAGRAM AND PARTS LIST... - Page 10 CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. Made in China...