Table of Contents
Related Manuals for Neilsen CT2818
Summary of Contents for Neilsen CT2818
- Page 1 233 PIECE ROTARY TOOL KIT CT2818 ORIGINAL INSTRUCTION SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. Cannon Tools Limited Address: 20 Station Road, Rowley Regis, West Midlands, B65 0JU.U.K.
-
Page 2: Ec Declaration Of Conformity
In case of alteration of the machine, not agreed upon by us, this declaration will lose its validity. Product description: 233 PIECE ROTARY TOOL KIT Model: CT2818 Applicable EC Directives: EC Machinery Directive 2006/42/EC EC Directive of Electromagnetic Compatibility 2014/30/EU... -
Page 3: Description (Fig A)
1. APPLICATION This rotary tool can be used for drilling, grinding, sanding and polishing, as well as engraving, cutting and removing rust in tight spaces or inaccessible places. The tool can be used on most metals, glass, wood and ceramics. For best performance and results keep the speed as even as possible without exercising too much pressure. -
Page 4: General Power Tool Safety Warnings
3. SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of Read manual before personal injury or damage to the tool In accordance with Class II- The essential safety machine is double standards of insulated;... - Page 5 4.2 Electrical safety Always check that the power supply corresponds to the voltage on the rating plate. Power tool plugs must match the outlet. Never modify the plug in any way. Do not use adapter plugs with earthed power tools. Unmodified plugs and matching outlets will reduce the risk of a lethal electric shock.
- Page 6 inserting the plug. Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely. Remove any adjusting keys or spanners before turning on the power tool. A spanner or key left attached to a rotating part of the power tool may result in personal injury.
-
Page 7: Specific Safety Warnings
Use the power tool, accessories and cutting tools, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work which needs to be done. Using a power tool in ways for which it was not intended can lead to potentially hazardous situations. -
Page 8: Important General Safety Tips
action. 8. IMPORTANT GENERAL SAFETY TIPS! The Tool should be unplugged when changing accessories. If you stall the tool, switch it off immediately. Periodically check the tightness of your collet chuck, especially during prolonged use of the same accessory After use, always disconnect your power tool Do not undertake repair of the power tool your self. -
Page 9: Technical Data
11. FLEXYDRIVE ASSEMBLY Remove the front ring nut from the tool by turning in an anti-clockwise direction. Partially unscrew the blocking ring nut from the spindle . Partially extract the internal transmission cable from the flexydrive. Insert the flexydrive transmission cable into the spindle of the tool pushing it in as far as possible. Keep the spindle block button pressed in and screw the spindle blocking ring nut turning it in a clockwise direction. - Page 10 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist.
-
Page 11: Expanded View
14. EXPANDED VIEW... -
Page 12: Parts List
15. PARTS LIST ITEN DESCRIPTION Plug Cord sleeve Screw M3 x 10 Trimming circuit bord Switch Screw M3 x 15 Left body Stator Brush Right body Rotor Spindle lock button Nose cap Collet Collet nut Bearing CANNON TOOLS LTD Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K. - Page 13 Made in china...