SHARPENING MACHINE CT2914 Ref no. 2001 INSTRUCTION MANUAL SAVE THESE INSTRUCTIONS AND PRECAUTIONS. READ ALL PRECAUTONS AND INSTRUCTIONS BEFORE USE. ...
Declare that the design and construction of the following machine, in the form supplied by us, comply with the requirements of the appropriate EC directives. Product description: SHARPENING MACHINE Model: CT2914 ●EC-Machinery directive 2006/42/EC ●EC-Directive on electromagnetic compatibility (EMC)2004/108/EC CANNON TOOLS LTD...
SPECIFICATIONS Power 230V,50Hz,1600RPM 70W Workign Capacity: 3mm to 10mm (s3:20% on: 2min off: 8min) Φ 58mm SAVE THIS MANUAL You will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, troubleshooting, parts list, and diagrams. SAFETY WARNINGS &...
Page 4
CHECK DAMAGED PARTS. Before using any tool, any parts that appears damaged should be carefully checked to determine that it would operate properly and perform its intended function. Check for binding of moving parts and any other condition that may affect proper operation.
Page 5
Sharpening procedures Step 1: Place sharpener on a flat, sturdy surface and plug in. Step 2: Select a clean bit to be sharpened and match its size worth one of the holes in the head. Step 3: Put the bit into the appropriate hole and turn the unit on. Step 4: Twist bit about 20 degrees from one side to another and exert a slight downward pressure onto the bit.
Cleaning Make sure to keep the surface of your unit free of grit, and grease. Use soapy water or nontoxic solvents. Do not use pertroleum-based solvents. Keep the air bents free of foreign matter at all times. TROUBLESHOOTING Sharpening Troubleshooting If the tip of is turning blue , it is overheating.