Bowflex TreadClimber TC100 Service Manual page 36

5. Remove the old Console Bezel Assembly and replace with new Console Bezel Assembly.
6. Installation is the reverse procedure.
7. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's
Manual.
WIRELESS HR
KEYPAD OVERLAY
DISPLAY BACKLIGHT
POD OVERLAY
USB
SPEAKER
UPPER
I/O CABLE
E-STOP
DISPLAY BACKLIGHT
CONTACT HR
36