No Power, Display Never Turns On - Bowflex TreadClimber TC100 Service Manual

No Power, Display Never Turns On

BEGIN HERE
Unplug the power cord from both
ends. Inspect the entire cord for
any damage or crimps. Plug the
power cord back in securely at
both ends.
Test the wall power
outlet with something, to
ensure it is working. For
example, plug a lamp in
to the wall power outlet.
Does the wall power
YES
outlet work properly?
NO
Use a different wall power
outlet.
Replace the upper
Does the
power cord need to
be replaced?
NO
Is the power cord
plugged directly in to
a 3 prong outlet?
YES
Does the
on / off switch glow,
when you flip it on? It
NO
is located next to
where the power cord
plugs in.
Replace the power cord,
and AC Inlet Power Wiring.
If a different wall
Plug the wires in.
power outlet does
not work, contact
customer care for
advanced
troubleshooting
assistance.
Replace the I/O cables.
NO
electronics.
Get a replacement power
YES
cord. Dispose of the
damaged power cord.
Plug the power cord
directly in to a properly
NO
wired 3-prong outlet.
Unplug the power cord
from the wall outlet and
the machine and wait 5
YES
minutes before
Check the AC Power
Wiring. The wires plug
in to the right side of
the MCB, and the other
end connects to the
back side of the on/off
NO
Does the console
YES
turn on?
13
While waiting the 5 minutes,
move to the right side of the
machine. The wires you will
be checking are connected to
continuing.
the right side of the MCB.
switch area.
Are the wires
plugged in
YES
securely?
NO
Issue resolved.
Check the
I/O connections at MCB,
top of right upright, and
back of console.
Does the console
turn on?
YES
Issue resolved.