Belt Wear / Damage - Bowflex TreadClimber TC100 Service Manual

Belt Wear / Damage

Issue resolved
BEGIN HERE
ABNORMAL
Long, string threads;
rips/tears in Belt(s).
Walking belt(s) need to be
replaced.
1. Obtain photo(s) of damage.
2. Replace Belts.
3. Follow the Walking Belt
Alignment instructions located in
the Owner's Manual after
replacing the Belts or treadle
assembly before using the
product.
4. Some walking styles may
push the Belts out, which may
cause some light belt fraying,
but this does not typically
impact the performance of the
Belts.
Assess Wear and
Damage
What type of wear
or damage are NORMAL
belts exhibiting?
1. Trim any ends of the threads.
2. Refer to the Walking Belt
Alignment section of the
Owner's Manual.
3. When in use, note how the
feet land on the walking belt. If
the feet push out, belt alignment
should be inspected more often.
22
Light Fraying, short fluffy
threads
Issue resolved