Repeat Label - SATO CX208/212 Programming Manual

CX208/212 Programming Guide
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 58

Repeat Label

<ESC>C
Example: See above
Placement: Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate data
stream
Default: None
To print duplicate of the last label printed
A duplicate of the previous label will be printed.
1. This command will have no effect if the power to the printer was
cycled off and back on since printing the previous label.
PN 9001092 Rev. A SATO CX208/212 Printers