Table of Contents
Advertisement
CX208/212 Programming Guide
Clear Print Job(s) & Memory
Command Structure
Command Function
Input to Printer:
Printer Output:
Special Note
Page 29
<ESC>*a
a
=
Specifies the internal memory section to be cleared
T To clear the custom character memory
& To clear the form overlay memory
X To clear all internal memory
Example:
<ESC>*
<ESC>*&
Placement:
This command should be sent to the printer as an
independent data stream.
Default:
None
To clear individual memory or buffer areas of the printer.
There is no printer output as a result of this command. The current
print job in the buffer will be terminated and all other print jobs in the
buffer cleared.
1. It is not necessary to clear the printer's memory between each
print job.
2. When the "a" parameter is used, the section of memory specified
will not be cleared until the label is printed.
3. When the "a" parameter is not included, all sections of memory will
be cleared (same as <ESC>*X).
PN 9001092 Rev. A
SATO CX208/212 Printers
Advertisement
Table of Contents
