Table of Contents
Advertisement
CX208/212 Programming Guide
Command Structure
Command Function
Input to Printer:
Printer Output:
Special Notes
Page 48
Media Size
<ESC>A1aaaabbbb
aaaa =
Vertical Media Size in dots (0 to Vmax)
bbbb =
Horizontal Media Size in dots (0 to Hmax)
Example:
<ESC>A108323200
Placement:
Separate data stream to the printer.
Default:
<ESC>A108323200 for CX208
<ESC>A108324800 for CX212
To set the size of the media.
Ther is no printer output resulting from this command. It is used to
automatically adjust the offset values for the size of label being used.
1. The Base Reference point is always the on the right (looking at
the front of the printer) side of the print head. This command
adjusts the Base Reference Point to correspond with the right
edge of the loaded media.
2. If the label size is changed, then this command must be
respecified to center the print image on the label.
3. All eight variables ("aaaa" and "bbbb") must be included in this
command.
Horizontal
bbbb
Vertical
aaaa
4. This command will clear and reconfigure the image buffer.
PN 9001092 Rev. A
CX208
0001 to 0832
0001 to 4060
SATO CX208/212 Printers
CX212
0001 to 1230
0001 to 3780
Advertisement
Table of Contents
