Repeat Label - SATO CT400 Operator And Technical Reference Manual

Section 4. Programming Reference
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
Page 4-62

Repeat Label

<ESC>C
Example: See above
Placement: Must be placed immediately after <ESC>A and
immediately before <ESC>Z in its own separate data stream
Default: None
To print duplicate of the last label printed
<ESC>A
<ESC>C
<ESC>Z
A duplicate of the previous label will be printed.
1. This command will have no effect if the power to the printer was
cycled off and back on since printing the previous label.
9001069A SATO CT Series Printers