Section 2: Command Codes
Command Structure
Command Function
Input to Printer
Printer Output
Special Notes
SATO CX400
Repeat Label
<ESC>C
Example:
See above
Placement:
Must be placed immediately after <ESC>A and
immediately before <ESC>Z in a separate data stream
Default:
None
To print duplicate of the last label printed
<ESC>A
<ESC>C
<ESC>Z
A duplicate of the previous label will be printed.
1. This command will have no effect if the power to the printer was
cycled off and back on since printing the previous label.
PN 9001106 Rev. A
Page 2-51