Table of Contents
Advertisement
CX208/212 Programming Guide
Rotate, Fixed Base Reference Point
Command Structure
Command Function
Input to Printer
Printer Output
Page 63
<ESC>%a
a
=
0
Sets print to normal direction
1
Sets print to 90°CCW
2
Sets print to 180° rotated (upside down)
3
Sets print to 270° CCW
Example:
<ESC>%3
Placement:
Preceding any printed data to be rotated
Default:
<ESC>%0
To rotate the print direction in 90° increments without changing the
location of the base reference point. The diagram below illustrates the
use of the <ESC>% Rotate command. Note that the entire print area
is shown, but your label will probably not be as large as the entire
area.
PN 9001092 Rev. A
SATO CX208/212 Printers
Advertisement
Table of Contents
