Specifications - SATO CL408-412e Supplemental Operating Manual

802.11G WIRELESS
The wireless print server provides easy printer interface with 802.11G Wi-Fi compliant networks free of wired
connections. Each printer is shipped with an integrated driver and interface installed. The driver must be loaded
onto the host computer and configured to run one of the supported protocols.
Variable Data Rates
Frequency Band
Wired Equivalent Privacy
Sensitivity
Range
Protocols
Protocol
IP Address
Subnet Mask
Gateway Address
Communication Mode
SSID
Channels
The dipswitches serve to initialize the configuration saved on the Wireless-LAN board, print the configuration, and make a self-
diagnosis. To communicate with the host,set the communication mode by through switches 5 and 6, then set the remaining
switches to the OFF position.
Print of configuration and self-diagnsis are operable only on the screen after turning on the printer. Ensure all switches are in
the OFF position when operating the printer.
SWITCH
1
2
3
4
NOTE: The communication mode may be set within the printer's Interface Mode. Go to [Communication] of the Interface Mode
to enable setup by either the dipswitches or through the Interface Mode.
INDICATOR 1 INDICATOR 2 INDICATOR 3
ON OFF
ON
ON
OFF OFF
OFF
CL408-412e Supplemental Manual

SPECIFICATIONS

54, 11, 5.5, 2 and 1 Mbps
2.4 GHz ISM Band
128 bit, 64 bit (compatible with 40bit), WPA, none
(typ, AAWGN, 8E-2 PER): -91dBm at 1Mbps, -88dBm at 2 Mdps, -87dBm at 5.5Mbps, -
84dBm at 11Mbps.
100m indoors, 300m outdoors
TCP/IP, IPX/SPX, Direct Mode IPX/IP, DLC/LLC, NetBEUI, NetBIOS/IP
Status3 return
Protocol for Driver (cyclic response mode)
Protocol for Driver (ENQ response mode)
Status5 return
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
0.0.0.0 to 255.255.255.255
802.11 Ad hoc, Ad hoc, Infrastructure
Optional alphanumeric character string (up to 32 characters)
01 to 11
DIPSWITCH SETTINGS
Reserved for test use only (setup prohibited).
LAN board EEPROM initialization (initialize configuration).
Print configuration details on a label (diagnostic & configuration).
Print a self-diagmosis of the board onto a label (wireless mode).
LED INDICATOR STATUS
OFF
ON OFF
ON ON
ON
ON OFF
Unit 3: Installation
SETTING
Weak Signal (1-50%)
Moderate Signal (50-75%)
Strong Signal (75-100%)
802.11 Ad hoc
Ad hoc
3-14
DESCRIPTION
PN: 9001159A