SATO CL408-412e Supplemental Operating Manual page 62

MENU
ONLINE
QTY: XXXXXX
MENU
MAINTENANCE MODE
DIPSW2-4 ON->OFF
FACTORY MODE
ALL CLEAR MODE
ALL CLEAR
COUNTER EEPROM
COUNTER ALLCLEAR
YES NO
EEPROM ALLCLEAR
YES NO
COUNTER ALLCLEAR
COMPLETED
EEPROM ALLCLEAR
COMPLETED
CL408-412e Supplemental Manual
Unit 4: Printer Configuration
HEX DUMP MODE (TABLE 4-12)
Displays to indicate the printer is online and waiting to print HEX interpretation of data received by
the print buffer.
MAINTENANCE MODE (TABLE 4-13)
Is the first menu screen of the Maintenance Mode and provides a prompt on the action required
to proceed to the Factory Mode.
The Factory Mode is divided into two sub-menus: the All Clear Mode and the individual Counter
Clear.
The All Clear Mode permits the operator to entirely clear all of the printer's internal counters or to
clear its EEPROM of all data.
Counter Clear permits the operator to select individual counters to be reset to zero.
Is a transitional, informational menu screen to inform of the coming menu functions. Pressing
LINE, retreats one menu screen to allow the operator to change direction within the menu.
Pressing FEED advances onward to allow the operator to entirely clear either the printer's
internal counters and/or, its EEPROM data.
Allows the selection of the direction to proceed within the menu tree. Selecting COUNTER will
advance to menu screens that will allow the printer's internal counters to be reset to zero.
Selecting EEPROM will advance to menu screens that will allow the printer's EEPROM to be
emptied of data.
Allows the selection of whether to clear all of the printer's internal counters or not. Select YES to
clear and NO to not clear.
Allows the selection of whether to clear all of the printer's EEPROM or not. Select YES to clear
and NO to not clear.
Is an informational screen only. Momentarily displays when the printer's internal counters are
reset to zero and then automatically returns to the ALL CLEAR MODE screen.
Is an informational screen only. Momentarily displays when the printer's EEPROM has been
emptied of data and then automatically returns to the ALL CLEAR MODE screen.
DESCRIPTION
DESCRIPTION
4-27
PN: 9001159A