Specifications; Printer - SATO Argox OS-200 User Manual

OS-214EX / OS-200
User Manual

6 Specifications

This chapter provides specifications for the printer.
change without notice.
Argox reserves the right to enhance and modify the specification without
prior notice. Please check Argox sales representative for most updated
specifications.

6.1 Printer

Model
CPU
Print method
Resolution
Media Alignment
Operation Mode
Sensor
Print Speed
Print Length
Print Width
Print Darkness
Max Printable Area
Print Ratio
Communication
Interface
Programming Language
Optional Accessories
OS-214EX / OS-200
32 bit RISC microprocessor
Direct Thermal and Thermal Transfer
203 dpi (8 dots/mm)
Standard: Continuous mode, Tear-off mode
Optional: Cutter mode
Media Sensor: Reflective
6 inches/sec (Max.)
Max 100"(2540mm)
Max 4.25"(108mm)
Darkness level: PPLB TT SD 0~30
Default: PPLB TT SD 5, DT SD 8
Average print ratio within 15 % or less (whole print layout
area)
Full width with 1mm pitch is required
OS-214EX:
USB (Host/Client), Ethernet, RS-232
OS-200:
USB (Client)
53
Specifications are subject to
Left
Ribbon Sensor
Max. 100"
PPLA+PPLB+PPLZ
Cutter, Stacker