Printer Installation; Site Location; Cable Connection - SATO CL408-412e Supplemental Operating Manual

PRINTER INSTALLATION

This chapter provides guidance on how to station, connect, and load the printer once unpacked.
Following printer setup, procede to the next chapter for information on interface selection.

SITE LOCATION

• Stationed on a solid flat surface.
• Stationed away from hazardous materials.
• Stationed within operational distance of the host based on interface specifications.

CABLE CONNECTION

The procedure below provides instruction on typical cable connection. The same procedure will apply to
others that are not mentioned, but their connectors are also performed from the printer's rear.
Interface Cable
CL408-412e Supplemental Manual
Unit 3: Installation
Host Computer
Interface Board
Power Cord
Figure 3-2, Cable Connection
Power Receptacle
3-3
Printer
PN: 9001159A