SATO CL408-412e Supplemental Operating Manual page 17

UNPACKING & PARTS IDENTIFICATION
Unpack the printer as directed in the following procedure.
1 Place the shipping container (box) upright on a soid, flat surface.
2 Open the box, remove any loose items and the first layer of packing material.
3 Carefully lift the printer and accessories from the box and place them on a solid flat surface.
4 Remove the plastic covers from the packed items and visually inspect for physical damage.
5 Ensure all components are present as dictated on the Packing List.
6 Report damaged property.
CL408-412e Supplemental Manual
Compact Disc
Power Cord
Packing Cushions
Figure 3-1, Unpacking & Parts Identification
Unit 3: Installation
3-2
Printer
Protective Sheet
Corrugated Box
PN: 9001159A