Settings Relevant To The Service Contract - Ricoh D143 Field Service Manual

2. Installation
3. Turn the main power switch on. The machine automatically starts the initialization procedure. The
Start button LED ( ) turns green when this procedure has finished.
4. Make copies of image samples (text, photo, and text/photo modes).
5. Do the Automatic Color Calibration process (ACC) as follows:
1). Print the ACC test pattern (User tools
2). Put the printout on the exposure glass.
3). Put 10 sheets of white paper on top of the test chart.
4). Close the ARDF or the platen cover.
5). Press "Start Scanning" on the LCD panel. The machine starts the ACC.
6. Check that the sample image has been copied normally.

Settings Relevant to the Service Contract

Change the necessary settings for the following SP modes if the customer has made a service contract.
• You must select one of the counter methods (developments/prints) in accordance with the contract
( SP5-045-001).
Item
Counting
method
A3/11" x 17"
double
counting
Service Tel.
No. Setting
46
SP No.
Specifies if the counting method used in
SP5-045-001 meter charge mode is based on
developments or prints.
Specifies whether the counter is doubled
for A3/11" x 17" paper. When you
SP5-104-001
have to change this setting, contact your
supervisor.
5812-002 programs the service station
fax number. The number is printed on the
SP5-812-001
counter list when the meter charge mode
through 004
is selected. This lets the user fax the
counter data to the service station.
Maintenance ACC
Function
Start).
Default
"0": Developments
"No": Single
counting