Ricoh D143 Field Service Manual page 83

4. Slide the ARDF toward the front of the machine.
5. Secure the ARDF with the two knob screws [D].
6. Connect the I/F cable [E] to the machine.
7. Remove two screws [F] from the bottom of the ARDF.
8. Remove all tapes on the ARDF.
9. Place the platen sheet [G] on the exposure glass.
10. Align the rear left corner (of the platen sheet) with the corner [H] on the exposure glass.
11. Close the ARDF.
12. Open the ARDF and check that the platen sheet is correctly attached.
ARDF Installation (D630)
81