2. Installation
8. Turn the main switch off.
9. Remove the SD card from SD Card Slot 2 (lower).
10. Turn the main switch on.
11. Check that the application programs run normally.
12. Make sure that the machine can recognize the option (see 'Check All Connections' at the end of
this section).
PostScript3 Unit Type C5502
• Unplug the main machine power cord before you do the following procedure.
1. Remove the SD-card slot cover [A] from the SD card slots (
2. Insert the SD card (PostScript 3) in SD slot 2 (lower) with its label face [B] towards the front of the
machine. Then push it slowly into SD slot 2 (lower) until you hear a click.
140
x 1).