Ricoh D143 Field Service Manual page 50

2. Installation
• Proxy server Port number (SP5816-064)
• Proxy User ID (SP5816-065)
• Proxy Password (SP5816-066)
4. Get a Request Number
Execute the @Remote Settings
1. Enter the SP mode.
2. Input the Request number which you have obtained from @Remote Center GUI, and then enter
[OK] with SP5816-202.
3. Confirm the Request number, and then click [EXECUTE] with SP5816-203.
4. Check the confirmation result with SP5816-204.
Value
0 Succeeded
1 Request number error
Communication error (proxy
3
enabled)
Communication error (proxy
4
disabled)
Proxy error (Illegal user name or
5
password)
6 Communication error
8 Other error
Request number confirmation
9
executing
5. Make sure that the screen displays the Location Information with SP5816-205 only when it has
been input at the Center GUI.
6. Click [EXECUTE] to execute the registration with SP5816-206.
7. Check the registration result with SP5816-207.
Value
0 Succeeded
1 Request number error
48
Meaning
Meaning
Solution/ Workaround
-
Check the request number again.
Check the network condition.
Check the network condition.
Check Proxy user name and password.
Check the network condition.
See "SP5816-208 Error Codes" below this.
Processing... Please wait.
Solution/ Workaround
-
Check the request number again.