2. Installation
13. Open the ARDF cover [I].
14. Open the feed-in guide plate [J] and feed-out guide plate [K].
15. Install the stamp [L] into the ARDF.
16. Close two guide plates [K] [J].
17. Close the ARDF cover [I].
18. Attach the decal [M] to the top cover as shown. Choose the language you want.
19. Plug in and turn on the main power switch of the machine, and then check the ARDF operation.
20. Make a full size copy. Check that the registrations (side-to-side and leading edge) and image skew
are correct. If they are not, adjust the registrations and image skew, referring to "Copy
Adjustments" in the "Replacements and Adjustments" section.
82