Computer Input; Input Source Selection (Computer 1: Rgb) - Sanyo PDG-DWL2500 Owner's Manual

Computer Input

Direct Operation
Choose Computer 1(RGB) by pressing the COMPUTER 1
button on the remote control.
Before using these buttons, correct input source should be
selected through Menu operation as described below.
Menu Operation
1
Press the MENU button to display the On-Screen
Menu. Use the Point
then press the Point
2
Use the Point ed
3
When Computer 1 is selected, press the Point
access the submenu items. Use the Point
to select the RGB input source and then press the
SELECT button.
4Note:
When the Input Search function is set to On 1 or On 2 in
the Auto setup function, the input signal will be searched
automatically (p.51).
30

Input Source Selection (Computer 1: RGB)

ed buttons to select Input and
or the SELECT button.
8
buttons to select Computer 1.
ed
Remote Control
Computer 1(RGB)
Computer 1(Scart)
Input Menu
8 to
buttons
Computer
1
COMPUTER 1 button