Manual Pc Adjustment - Sanyo PDG-DWL2500 Owner's Manual

Computer Input
Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector.
Manual PC adjustment enables you to precisely adjust several parameters to match those signal formats. The
projector has five independent memory areas to store those parameters manually adjusted. It allows you to
recall the setting for a specific computer.
1
Press the MENU button to display the On-Screen
Menu. Use the Point
and then press the Point
2
Use the Point
ed
and then press the SELECT button to display the
adjustment dialog box. Use the Point
adjust the setting value.
Fine sync
Use the Point 7 8 buttons to adjust the value, eliminating a
flicker from the image displayed (from 0 to 31).
Total dots
Use the Point 7 8 buttons to adjust the number of total dots
in one horizontal period to match your PC image.
Horizontal
Use the Point 7 8 buttons to adjust the horizontal picture
position.
Vertical
Use the Point 7 8 buttons to adjust the vertical picture
position.
Current mode
Press the SELECT button to show H-sync freq . and V-sync
freq . of the connected computer.
Clamp
Use the Point 7 8 buttons to adjust the clamp level. When
the image has dark bars, try this adjustment.
4Note:
Fine sync and Total dots cannot be selected when the
input signal is 480i, 480p, 575i, 575p, 720p or 1080i.
3

Manual PC adjustment

buttons to select PC adjust
ed
or the SELECT button.
8
buttons to select the desired item
7 8 buttons to
PC adjust Menu